Coil Handling & Press Feeding Equipment For Metal Stamping

GLK3-600 3 in 1 unit coil feeder: Our GLK3 series 3 in 1 unit coil feeder is suitable for 0.5-4.5mm thickness metal coils with yield strength under 360MPA. Honger also have GLK4 for 0.6-6.0mm thickness coil sheet and GLK4-H for high yield strength metal coils. To upgrade the single punch stamping line which operate by labors, we could change the press tool to progressive mold and choose a coil feeder machine to compact with press machine for automation feeding. A automatic metal coil stamping line should like decoiler straightener feeder machine compacted press. This line could increase the product capacity and save labor cost. Also save work space. Or if the material is metal plate not coil, we could choose the manipulator transfer arm to equip with press machine.

GL decoiler straightener 2 in 1 machine: 1, This machine is one of our 2 in 1 combo machine with hashtag # decoiling and hashtag # straightening function. 2, The pressing arm is for optional. Often we suggest to choose pressing arm once the metal thickness is over 2.0mm. 3, hashtag # Decoiler mandrel is with manual expansion in standard. While hydraulic expansion is optional. 4, With frequency inverter to control speed. Meanwhile, it could prevent the motor from damage if the machine suddenly stop. 5, Straightener cover can be opened for cleaning and maintenance. 6, hashtag # Straightener rollers are adjusted by worm and gear. All rollers are electroplated with chrom to achieve HRC 60-62 of roller surface. And each roller will be tested to make sure about the concentricity with 0.005mm accuracy. 7, 2 in 1 decoiler straightener can be equipped with servo hashtag # feeder machine and hashtag # press for hashtag # metal hashtag # stamping . 8, Compared with single deco